Tel: 805-968-0782 /800-350-2727 | Fax: 805-968-3154 /800-960-2726 | 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com
These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry, and Security, Export Administration regulations. Diversion contrary to U.S. law is prohibited.
SPECIAL FEATURES:
S = Special
features specified
on purchase order
(consult factory)
Mechanical Specifications
Allowable Misalignment: SP11 Flex Shaft is designed
to accommodate up to 0.04” T.I.R radial and ±0.02 axial;
Consult factory for other shaft options
Starting Torque at 25°C: Blind shaft version (BS) = 10
in-oz (max)
Bearings: 52100 high carbon steel.
Shaft Material: 416 stainless steel
Bearing Housing: Die cast and machined aluminum
with dichromate finish standard. Hard anodized finish
available.
Cover: Die cast and machined aluminum.
Bearing Life: 7.5 X 10
9
revs (50,000 hrs at 2500 RPM)
Maximum RPM: 6,000 MAX. (Temp. Derated 5ºC/1,000
RPM above 2,000 RPM for continuous operation)
Moment of Inertia:
Blind Shaft = 8.6 x 10
-3
oz-in-sec
2
*
*with spline flex shaft option
Weight:
pprox. 3.3 lbs or 1.5 kg
BEI Sensors
Electrical Specifications
Code: Incremental (Absolute option available)
Output Format: 2 channels in quadrature, 1/2 cycle
index gated with negative B channel
Cycles Per Shaft Turn: 1 to 80,000 (see table 1) For
resolutions above 5,000 see BEI for interpolation options
Supply Voltage: 5 to 28 VDC available
Current Requirements: 100 mA typical +output load,
250 mA (max)
Voltage/Output: (see note 3)
28V/V: Line Driver, 5–28 VDC in, Vout = Vin
28V/5: Line Driver, 5–28 VDC in, Vout = 5 VDC
28V/OC: Open Collector, 5–28 VDC in, OCout
Protection Level: Reverse, overvoltage and output short
circuit
Frequency Response: 100 kHz, up to 1MHz with
interpolation option (see note 5)
Output Terminations: Side conduit
Note: Consult factory for other electrical options
Environmental Specifications
Enclosure Rating: IP66
Hazardous Area Rating:
Class I, Div 1, Groups C and D
CENELEC/ATEX Gas Groups
IECEx certified
Temperature: Operating, 0 to 70ºC; extended
temperature testing available (see note 6); 80ºC max;
storage -25 to 90ºC.
Shock: 50 g’s for 11 msec duration
Vibration: 5 to 2000 Hz @ 20 g’s
Humidity: 100% RH without condensation
NOTES & TABLES: All notes and tables referred to in the
text can be found on the back of this page.
HS52 Incremental Ordering Options for assistance, call 800.350.2727
Use this diagram, working from left to right to construct your model number (example: HS52-SP11-BS-1024-ABZC-28V/V-SC-CEN)
All notes and tables referred to can be found on the back of this page.
TYPE:
HS = Hollow Shaft
52 = 5.2”Dia.
FLEX SHAFT BORE:
SP11 = 11 tooth spline bore
SHAFT
CONFIGURATION:
BS = Blind Shaft
CYCLES PER TURN:
See Table 1, next page
NO. OF CHANNELS:
ABZC = Dual Quad w/ Index
and complements
OUTPUT
TERMINATION:
SC = dual ¾” – 14 NPT in sides of term. box
EN 55011 and EN 61000-6-2 CENELEC/ATEX : Ex d IIB T4 Gb
UL: Class I, Div 1, Group C & D
Model HS52 Explosion Proof
Hollow Shaft Incremental Encoder
VOLTAGE / OUTPUT:
28V/V = 5-28 Vin/out
28V/5 = 5-28 Vin/5Vout
28V/OC = 5-28Vin/OCout
Picturedwithhardanodized
inishspecial
eature
CERTIFICATION:
CEN = UL Class I Div 1 and
CENELEC/ATEX
EXD = CENELEC/ATEX only
Blank = not certified
HS52 ABZC SC
The HS52 is the industry’s first UL and ATEX rated explosion proof hollow shaft
encoder. Capable of operating directly in Division 1 or Zone 1 environments, the
HS52 does not need an Intrinsic Safety barrier. This provides a simpler, more
streamlined feedback system in explosion proof environments worldwide. Fitted with
a flex shaft in the bore, the HS52 housing can be rigidly mounted, preventing stress to
encoder bearings and providing a more secure attachment for the required hazardous
area conduit fittings. Additionally, the compact hollow shaft design provides
engineers space saving advantages over traditional shafted encoders.
The HS52 is the ideal position sensing solution for use in oil and gas industries,
solvent refining operations, spray painting applications, and explosive environments
where space is limited and operating conditions are extreme.
IECEx UL 11.0009X
BS
(34 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern