Bei-sensors SA100R Rotary Digital Display Bedienungsanleitung PDF herunterladen

SA100(R) Rotary Digital Display

Construction: 1/16” sheet metal

Dimensions: Height: 2.835”, Width: 5.878”,

Depth: 2.756”, Weight: 1.07 lbs

Operating Voltage: 12-27 VDC ±10%

(power supply 60012-003 included)

Maximum Power Consumption: 6 watts

Maximum Data Rate: 2MHz

Operating Temperature: 0 to 45°C

Storage Temperature: -20 to 60°C

Inputs: Two channels in quadrature. Differential

or single ended (user selectable)

Environment: Indoor use, IP20

(subject to change without notice)

Tel: 805-968-0782 /800-350-2727 | Fax: 805-968-3154 / 800-960-2726 | 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beiied.com

Specification No. 924-02102-001 Rev.1-07

This versatile 7-digit display reads out in degrees/minutes/seconds (DMS) or deci-

mal degrees. Resolutions up to 0.001 degree are selectable from the front panel.

The SA100 (R) accepts a 5VDC standard differential quadrature signal from either

linear or rotary incremental encoders. Incremental and absolute operating modes

are available. The SA100(R) also features an auxiliary reference input, allowing inte-

gration of an independent reference marker from a remote switch. The SA100(R)

comes with its own 12VDC power supply which operates on 115 VAC line voltage.

A Setup Mode allows front panel programming of

• automatic calibration

• display resolution

• axis resolution

• count direction

• loss of signal error

• referencing

• angular error

• gear ratio compensation

• table radius factors

BEI P/N 924-60012-005

An optional installation kit is available for the

SA100(R). The kit includes all necessary hard-

ware to mount the SA100(R) into a panel or to

attach an adjustable support for desktop use.

BEI P/N: 31326-001, $25.00

Encoder Input (9-way D)

Pin No. Function

1 N/C (or 0V)

2 Channel A

3 Channel /A

4 Channel B

5 Channel /B

60V

7 +5V

8 Channel Z

9 Channel /Z

Technical Specifications

Mounting Kit

(Optional)

Panel

Mounting

Encoder

Input

(9 pin

D type

connector)

Encoder- Type

selector switches

Cable

retaining

clamp

2.5mm power inlet

(12-27 VDC ± 10%)

Auxiliary Input

Differential

Encoder

Single Ended

Encoder

Desktop or Support

Mounting Arm

Inhaltsverzeichnis

Seite 1 - (Optional)

SA100(R) Rotary Digital DisplayConstruction: 1/16” sheet metalDimensions: Height: 2.835”, Width: 5.878”, Depth: 2.756”, Weight: 1.07 lbsOperating Volt

Kommentare zu diesen Handbüchern

Keine Kommentare

Bei-sensors SA100R Rotary Digital Display Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Bei-sensors SA100R Rotary Digital Display herunter. BEI Sensors SA100R Rotary Digital Display User Manual [it] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Bei-sensors SA100R Rotary Digital Display